Home / Workholding & Clamps / Bench Dogs
Workbench stop and dog-hole guide

Best Workbench Bench Dogs and Adjustable Stops

Compare round bench dogs, short pups, flush retractable stops and cam-action dogs for common 3/4-inch workbench holes.

Compare Current OptionsCompare Bench Dogs

Affiliate disclosure: As an Amazon Associate, WorkshopGearGuide may earn from qualifying purchases made through qualifying links, at no additional cost to you. Retailer specification links below are provided for verification and are not represented as Amazon offers.

Quick answer

Match the dog to the workbench, not just the hole diameter. Standard brass dogs and shorter pups are passive stops. Prairie Dogs retract flush, while a Quick-Release Wonder Dog actively presses against stock. All four listed designs use 3/4-inch round holes, but post clearance and installation details differ.

Compare workbench bench dogs by stop style

The right stop depends on bench thickness, underside clearance and whether you need passive positioning or active side pressure.

Bench dog / best useHole and postStop mechanismDistinct advantageSee prices
Veritas Round Bench Dogs
Planing against a vise
3/4 in hole / 4-3/8 in postBrass / spring retainedCrosshatched face and inward slope help keep a board against the stop.See Prices
Veritas Round Bench Pups
Thin tops and bench aprons
3/4 in hole / 2-3/8 in postBrass / spring retainedShorter post fits benches up to 2 inches thick and bench-front locations.See Prices
Veritas Prairie Dog
Unobstructed work surfaces
3/4 in hole / 5/16 in raised2 to 2-1/2 in hole depthPush-to-raise stop recesses into the worktop when not in use.See Prices
Veritas Quick-Release Wonder Dog
Irregular workpiece edges
3/4 in hole / under 8 in travel2-3/4 in post / cam leverCam lever advances a low-profile head against curved or uneven work.See Prices

These are bench stops and side clamps, not impact-set holdfasts. Measure dog-hole diameter and underside clearance before buying.

Detailed bench dog and stop reviews

Four documented designs for locating or restraining workpieces; we did not perform grip-force testing.

Standard bench stop

Veritas Round Bench Dogs

Fit: Planing against a vise

Hole / post dimensions3/4 in hole / 4-3/8 in post
Mechanism / fitBrass / spring retained
Best usePlaning against a vise
ProductVeritas Round Bench Dogs

Published fit: 3/4 in hole / 4-3/8 in post; Brass / spring retained.

Lee Valley specifies a 4-3/8-inch solid brass post, side spring, crosshatched face and a 2-degree inward face angle. It fits 3/4-inch round holes and works as an adjustable-height stop against a vise or opposing dog. Sold singly or in pairs.

Why consider it: Crosshatched face and inward slope help keep a board against the stop.

Trade-off: The long post needs clearance below shallow benches.

Best suited to: planing against a vise when dog-hole fit has been confirmed.

See Prices

Published product specifications for Veritas Round Bench Dogs. Verify current configuration before buying.

Short bench stops

Veritas Round Bench Pups

Fit: Thin tops and bench aprons

Hole / post dimensions3/4 in hole / 2-3/8 in post
Mechanism / fitBrass / spring retained
Best useThin tops and bench aprons
ProductVeritas Round Bench Pups

Published fit: 3/4 in hole / 2-3/8 in post; Brass / spring retained.

The 2-3/8-inch brass Bench Pup is designed for 3/4-inch holes, with a side spring and a crosshatched face angled inward 2 degrees. Lee Valley specifically identifies tops up to 2 inches thick and bench aprons as good uses.

Why consider it: Shorter post fits benches up to 2 inches thick and bench-front locations.

Trade-off: Less post length for thicker tops; not intended to replace a clamping screw.

Best suited to: thin tops and bench aprons when dog-hole fit has been confirmed.

See Prices

Published product specifications for Veritas Round Bench Pups. Verify current configuration before buying.

Flush retracting stop

Veritas Prairie Dog

Fit: Unobstructed work surfaces

Hole / post dimensions3/4 in hole / 5/16 in raised
Mechanism / fit2 to 2-1/2 in hole depth
Best useUnobstructed work surfaces
ProductVeritas Prairie Dog

Published fit: 3/4 in hole / 5/16 in raised; 2 to 2-1/2 in hole depth.

The Prairie Dog pops up about 5/16 inch and retracts with another press. Lee Valley specifies 3/4-inch holes 2 to 2-1/2 inches deep, with an underside steel plate and magnet for through-hole installations. It is a low-profile stop, not a holdfast.

Why consider it: Push-to-raise stop recesses into the worktop when not in use.

Trade-off: Requires specified depth and an underside plate or blind-hole washer.

Best suited to: unobstructed work surfaces when dog-hole fit has been confirmed.

See Prices

Published product specifications for Veritas Prairie Dog. Verify current configuration before buying.

Adjustable side clamp

Veritas Quick-Release Wonder Dog

Fit: Irregular workpiece edges

Hole / post dimensions3/4 in hole / under 8 in travel
Mechanism / fit2-3/4 in post / cam lever
Best useIrregular workpiece edges
ProductVeritas Quick-Release Wonder Dog

Published fit: 3/4 in hole / under 8 in travel; 2-3/4 in post / cam lever.

The quick-release Wonder Dog uses a 3/4-inch diameter, 2-3/4-inch post with a cam lever and just under 8 inches of horizontal travel. Its head accepts a custom-shaped face through two screw holes, helping with irregular edges.

Why consider it: Cam lever advances a low-profile head against curved or uneven work.

Trade-off: Costs more and adds an active clamp mechanism; not a simple passive stop.

Best suited to: irregular workpiece edges when dog-hole fit has been confirmed.

See Prices

Published product specifications for Veritas Quick-Release Wonder Dog. Verify current configuration before buying.

Six checks before buying bench dogs

Confirm 3/4-inch round holes

Do not substitute these for square mortises or 20 mm MFT holes.

Measure under-bench clearance

Long brass posts can hit shelves, aprons or other obstructions.

Plan vise alignment

A dog and end vise work together to restrain stock for planing.

Keep faces clean

Remove glue residue that could reduce grip or mark a board.

Use non-marring contact

A protective dog muzzle can reduce marks on finished edges.

Check the stop mechanism

Retractable and cam-action designs need different setup than passive dogs.

How to choose bench dogs for a woodworking bench

Start with the hole pattern

These round Veritas models fit 3/4-inch holes. Square traditional dogs and metric 20 mm workholding systems are different standards.

Check post length and clearance

The 4-3/8-inch round dog requires more underside space than the 2-3/8-inch Bench Pup. A shallow bench or shelf can limit adjustment.

Choose passive or active pressure

Round dogs and Prairie Dogs provide stops, generally used with a vise or another clamp. The Wonder Dog adds cam-adjusted lateral pressure.

Consider retractability and surface protection

Prairie Dogs recess when not needed. Brass contact faces are tool-friendly, but protective muzzles are useful on delicate finishes.

Compare bench dog options

Verify the dog-hole diameter, bench thickness and required stop mechanism before purchasing.

Compare Current OptionsReview Bench Dog Comparison
Editorial standards / 01

How we evaluated bench dogs

We checked published manufacturer dimensions, dog-hole fit and adjustment mechanisms. No hands-on holding-force tests were performed.

SPECIFICATION-BASED ANALYSIS

Documented fit and operation

Lee Valley product documentation supplied post lengths, hole sizes and adjustment details.

Round brass dogs, retractable stops and cam-action clamps solve different workholding problems.

What the data does not establish

  • Measure round dog holes before purchase.
  • Confirm clearance beneath the worktop.
  • Use suitable opposing clamping pressure.
  • Keep springs and moving parts free of glue.
  • Protect finished edges with non-marring pads.
Measured on paper / 02

Three published bench dog fit benchmarks

Use these dimensions to distinguish standard stops, short stops and retractable systems.

Round dog post
4-3/8 inBrass standard stop for a 3/4-inch hole.
Bench Pup post
2-3/8 inShort version for benches up to 2 inches thick.
Prairie Dog rise
5/16 inRetracts flush when not required.

Manufacturer-published dimensions; these are not measured holding-force ratings.

Decision guide / 03

Which bench dog fits your work?

Choose based on available hole depth, how you restrain the stock and whether the stop must disappear below the surface.

General stopVeritas Round Dogs

Brass spring-retained stops for use with a bench vise.

Review Round Dogs
Shallow benchVeritas Bench Pups

Shorter brass posts for thinner tops and bench aprons.

Review Bench Pups
Clear tabletopVeritas Prairie Dog

Low-profile push-to-retract stop for planned hole depths.

Review Prairie Dog
Active side holdQuick-Release Wonder Dog

Cam-lever side pressure for irregular workpieces.

Review Wonder Dog
Before you order / 04

Five bench dog mistakes to avoid

01 / Assuming all holes are identical

A 3/4-inch round dog will not directly fit a 20 mm hole or a square mortise.

02 / Forgetting underside clearance

Long dog posts can collide with a shelf, brace or bench apron.

03 / Using a passive dog as a clamp

Add opposing pressure from a vise or appropriate clamp to restrain the board.

04 / Ignoring retractable-stop depth

Prairie Dog mechanisms have published hole-depth and mounting requirements.

05 / Scratching finished stock

Use clean dog faces and protective contact pads where needed.

Workbench bench dog FAQs

What hole diameter do Veritas round bench dogs use?

The round dogs, Bench Pups, Prairie Dogs and Quick-Release Wonder Dog described here use 3/4-inch round dog holes.

How is a Bench Pup different from a full-length dog?

A Bench Pup has a 2-3/8-inch post rather than the 4-3/8-inch post of the standard round dog, making it suitable for thinner benches.

Do bench dogs hold a board without a vise?

Passive dogs primarily act as stops. Most planing setups use an opposing bench vise, clamp or other restraint to keep the board from moving.

Can Prairie Dogs sit flush with the bench surface?

Yes. The spring-loaded Prairie Dog presses down to retract and pops up about 5/16 inch when activated.

Can a 3/4-inch bench dog fit a 20 mm MFT hole?

Not as an exact fit: 20 mm is larger than 3/4 inch. Use workholding made for the hole system or a maker-approved adapter.

What is the purpose of the Wonder Dog cam lever?

Its lever applies adjustable lateral pressure to the workpiece, unlike a passive brass stop.

Will brass bench dogs mark finished wood?

Brass is less likely to damage a cutting edge than steel, but textured faces can still leave impressions. Use non-marring contact pads on delicate finishes.

Related workshop guides

Source transparency / 05

Research notes & specification sources

Research method: We compared Lee Valley manufacturer specifications for bench dog geometry, hole size and adjustment mechanisms. We did not conduct hands-on force testing.

Important limitation: These products include passive stops, a retractable stop and a cam-action side clamp; they do not all work in the same way.

Affiliate buttons link to product searches; source links provide technical documentation.

Scroll to Top