Home / Workshop Machines / Buying Guide
Independent specification-based buying guide

Best Drill Press Vises for Accurate, Secure Drilling

Compare drill press vises by jaw capacity, table mounting, cross-slide travel and the workpieces you need to hold securely.

Compare Current VisesCompare Buffer Options

Affiliate disclosure: As an Amazon Associate, WorkshopGearGuide may earn from qualifying purchases made through qualifying links, at no additional cost to you. Retailer specification links below are provided for verification and are not represented as Amazon offers.

Quick answer

A standard drill press vise is best for repeatable straight drilling; a cross-slide vise is useful for controlled X-Y positioning but adds height and setup complexity. Always bolt or clamp the vise securely and check drill clearance.

Compare drill press vises

These are workholding tools, not substitutes for securing the vise to the drill press table. Check jaw opening, mounting slots and spindle clearance before buying.

Vise / best fitJaw classVise styleCritical fit checkShop Options
WEN CV413 - Budget cross-slide positioning4-inch classCross-slideVerify machine slot spacingCheck Prices
WEN 424DPV - General drill press clamping4-inch classStandard drill press viseVerify jaw opening and bolt slotsCheck Prices
Wilton 11746 - Durable general-purpose holding4-inch classMachined viseVerify mounting and jaw widthCheck Prices
Irwin 226340 - Portable drill press setup4-inch classBench/drill press viseVerify clearance and clampingCheck Prices

Amazon links are product-category searches. Specific models sold by exclusive retailers may not be available on Amazon; verify model numbers before purchasing.

Detailed drill press vises evaluations

These comparisons use published manufacturer specifications and intended applications. We have not physically tested these buffers or measured finish quality.

Budget cross-slide posi

WEN CV413

Model: WEN CV413

Jaw class4-inch class
StyleCross-slide
MountingVerify machine slot spacing
Use caseFine adjustments for light drilling

Assessment: WEN CV413 is a candidate for budget cross-slide positioning. Confirm its current dimensions and jaw opening against the seller or manufacturer before ordering.

Fine adjustments for light drilling. Check that the vise clears the drill chuck at full travel and that its mounting hardware matches your table. Never hold a spinning workpiece by hand.

Assessment: Budget cross-slide positioning.

Assessment: Verify machine slot spacing.

Assessment: Verify jaw opening, base height and weight before purchase.

Check Prices

Manufacturer product search / specification check

General drill press cla

WEN 424DPV

Model: WEN 424DPV

Jaw class4-inch class
StyleStandard drill press vise
MountingVerify jaw opening and bolt slots
Use caseSimple repeated hole drilling

Assessment: WEN 424DPV is a candidate for general drill press clamping. Confirm its current dimensions and jaw opening against the seller or manufacturer before ordering.

Simple repeated hole drilling. Check that the vise clears the drill chuck at full travel and that its mounting hardware matches your table. Never hold a spinning workpiece by hand.

Assessment: General drill press clamping.

Assessment: Verify jaw opening and bolt slots.

Assessment: Verify jaw opening, base height and weight before purchase.

Check Prices

Manufacturer product search / specification check

Durable general-purpose

Wilton 11746

Model: Wilton 11746

Jaw class4-inch class
StyleMachined vise
MountingVerify mounting and jaw width
Use caseFrequent shop drilling

Assessment: Wilton 11746 is a candidate for durable general-purpose holding. Confirm its current dimensions and jaw opening against the seller or manufacturer before ordering.

Frequent shop drilling. Check that the vise clears the drill chuck at full travel and that its mounting hardware matches your table. Never hold a spinning workpiece by hand.

Assessment: Durable general-purpose holding.

Assessment: Verify mounting and jaw width.

Assessment: Verify jaw opening, base height and weight before purchase.

Check Prices

Manufacturer product search / specification check

Portable drill press se

Irwin 226340

Model: Irwin 226340

Jaw class4-inch class
StyleBench/drill press vise
MountingVerify clearance and clamping
Use caseOccasional hobby drilling

Assessment: Irwin 226340 is a candidate for portable drill press setup. Confirm its current dimensions and jaw opening against the seller or manufacturer before ordering.

Occasional hobby drilling. Check that the vise clears the drill chuck at full travel and that its mounting hardware matches your table. Never hold a spinning workpiece by hand.

Assessment: Portable drill press setup.

Assessment: Verify clearance and clamping.

Assessment: Verify jaw opening, base height and weight before purchase.

Check Prices

Manufacturer product search / specification check

Six checks before buying a drill press vise

Wheel speed rating

Measure your widest workpiece and allow room for parallels or soft jaws.

Arbor and flange fit

Confirm bolt-slot centers match the drill press table or use suitable clamps.

Clearance around the wheel

A tall vise reduces available spindle-to-table clearance.

Motor and duty cycle

Look for consistent parallel clamping and a flat mounting base.

Bench mounting

For X-Y vises, check usable travel and backlash, not just overall size.

Compound and material

Secure the vise and stock; use a backing board where appropriate.

How to select a drill press vise

Standard versus cross-slide

A conventional vise holds stock for fixed-hole drilling; a cross-slide vise allows small positional adjustments but is not a milling machine.

Jaw capacity and stock shape

Measure jaw width, opening and depth. Use V-groove jaws or fixtures when holding round stock.

Table attachment and safe drilling

Bolt or clamp the vise to the table and secure the workpiece. Check quill travel and bit clearance before powering on.

Buffing versus grinding

A drill press vises is built around polishing wheels and compounds. A grinder is configured for bonded abrasive wheels; do not assume accessories or safety requirements are interchangeable.

Compare current drill press vise options

Check the exact jaw opening, mounting-slot pattern and overall height before ordering.

Check PricesCheck Prices
Editorial standards / 01

How we evaluated drill press vises

We compared published vise styles, jaw capacity classes, mounting requirements and typical workshop uses. No hands-on testing is claimed.

SPECIFICATION-BASED ANALYSIS

What we checked, and what we did not

We prioritized secure workholding, mounting compatibility, accessible adjustment and suitable jaw geometry rather than unverified precision claims.

Manufacturers and retailers may revise models. Confirm current dimensions, mounting hardware and instructions before purchase.

What matters most

  • Measure jaw width and usable opening.
  • Check drill press table slots and vise footprint.
  • Allow clearance for chuck and workpiece.
  • Verify vise base flatness and screw operation.
  • Use appropriate clamps, bolts and protective equipment.
Measured on paper / 02

Three dimensions that determine vise fit

Measure these dimensions on your drill press and workpiece before selecting a vise.

Nominal jaw class
4 inCommon starting point; verify usable opening
Table attachment
Slot fitMeasure bolt pattern and table clearance
Available drill height
CriticalVise height reduces usable workpiece space

Nominal jaw width does not establish maximum opening, accuracy or mounting compatibility. Check current drawings and manuals.

Decision guide / 03

Which drill press vise suits your work?

Choose based on clamping style and table compatibility rather than price alone.

Budget cross-slide positioningWEN CV413

Fine adjustments for light drilling. Verify machine slot spacing.

Read WEN CV413 review
General drill press clampingWEN 424DPV

Simple repeated hole drilling. Verify jaw opening and bolt slots.

Read WEN 424DPV review
Durable general-purpose holdingWilton 11746

Frequent shop drilling. Verify mounting and jaw width.

Read Wilton 11746 review
Portable drill press setupIrwin 226340

Occasional hobby drilling. Verify clearance and clamping.

Read Irwin 226340 review
Before you order / 04

Five drill press vise buying mistakes

01 / Ignoring table slot fit

A vise that cannot be secured properly is unsafe.

02 / Choosing jaw width alone

Usable jaw opening and stock shape matter just as much.

03 / Forgetting headroom

Tall vises can prevent the bit from clearing your stock.

04 / Treating cross-slide as milling

Drill presses generally are not rated for side-loading.

05 / Leaving workpieces unsecured

The vise and workpiece both need reliable restraint.

Drill press vise FAQs

What is a drill press vises used for?

A vise is useful for securing small or awkward workpieces, but it must itself be fixed to the drill press table.

Is 1725 RPM or 3450 RPM better for polishing?

No. Most drill presses are not designed for lateral milling loads or tool retention under side force.

Can I put a buffing wheel on any bench grinder?

A 4-inch class vise is a common starting point; jaw opening and your workpiece dimensions matter more than nominal width.

Do drill press vises include polishing wheels?

Yes. Secure it with suitable bolts or clamps following the machine and vise instructions.

What buffing compound should I use?

Use properly sized V-jaws, a V-block or a dedicated fixture, and prevent the part from spinning.

How do I secure a drill press vises?

No. Measure mounting slots, table dimensions, vise footprint and available spindle clearance.

What safety equipment is important?

They can speed repeated setup, but check locking reliability, jaw alignment and workholding capacity.

Related workshop guides

Source transparency / 05

Research notes & specification sources

Research approach: manufacturer model references and vise workholding principles were compared without hands-on testing. Confirm all current model specifications and safety instructions independently.

Scroll to Top