Best Bench Vises for Workshop Workholding
Compare jaw opening, throat depth, swivel range, construction and pipe-gripping options before bolting a vise to your workshop bench.
Compare Current OptionsSee Bench Vise ComparisonAffiliate disclosure: As an Amazon Associate, WorkshopGearGuide may earn from qualifying purchases made through qualifying links, at no additional cost to you. Retailer specification links below are provided for verification and are not represented as Amazon offers.
Quick answer
Choose by workpiece shape and bench strength. A six-inch general-purpose vise is useful for metalworking and repairs, but jaw opening, throat depth and secure mounting matter more than nominal jaw width alone. For round pipe, consider a model with dedicated pipe jaws. Protect finished wood with soft jaws.
Compare bench vises by jaw capacity
Published dimensions are model-specific. Jaw width is not the same as maximum opening, and a swivel base does not replace solid mounting hardware.
| Vise / primary use | Jaw size and opening | Throat / weight | Distinct advantage | See prices |
|---|---|---|---|---|
| Wilton 11106 General Purpose Steel and shop repairs | 6 in jaw / 5 in opening | 3 in throat / 39 lb | Wide jaws, 120-degree swivel and published 5,500 lb clamping-force claim suit substantial metal work. | See Prices |
| IRWIN 4935506 Mechanics General metal holding | 6 in jaw / 4.9 in opening | 3 in throat / swivel | Fused steel handle, integrated anvil and swivel base suit frequent repair tasks. | See Prices |
| BESSEY BV-HD60 Heavy Duty Flexible bench positions | 6 in jaw / 6 in opening | 2-3/8 in throat / 27 lb | Manufacturer catalog specifies a 360-degree swivel and ductile-iron body. | See Prices |
| BESSEY BV-MPV5 Multi-Purpose Pipe plus flat stock | 5 in jaw / 5 in opening | 2-3/4 in throat / 29 lb | Rotating pipe-jaw assembly grips round stock without relying only on flat serrated jaws. | See Prices |
Manufacturer specifications are not standardized load tests. Verify the exact model, mounting instructions and usable opening before purchase.
Detailed bench vise evaluations
Four distinct workholding choices, compared from published specifications rather than claimed hands-on testing.
Wilton 11106 General Purpose
Fit: Steel and shop repairs
Documented dimensions: 6 in jaw / 5 in opening; 3 in throat / 39 lb.
Wilton lists this current WL9-11106 as a six-inch general-purpose swivel-base vise with a five-inch maximum opening, three-inch throat and 39-pound net weight. The manufacturer also claims 5,500 pounds of clamping force. That figure is not a tested cross-brand comparison. Reinforce the bench before mounting and use soft jaw pads for finished pieces.
Why consider it: Wide jaws, 120-degree swivel and published 5,500 lb clamping-force claim suit substantial metal work.
Trade-off: Heavy to mount; gray-iron body and aggressive jaws can mark delicate stock.
Best suited to: steel and shop repairs when mounted to a properly supported bench.
Manufacturer documentation for Wilton 11106 General Purpose. Check the exact model and current product sheet.
IRWIN 4935506 Mechanics
Fit: General metal holding
Documented dimensions: 6 in jaw / 4.9 in opening; 3 in throat / swivel.
IRWIN confirms model 4935506 is part of its mechanics-vise range with a fused steel handle, swivel base and incorporated anvil. Distributor specifications identify six-inch jaws, approximately 4.9-inch opening and three-inch throat. Confirm these dimensions against the actual package before ordering, as the official listing does not show all of them together.
Why consider it: Fused steel handle, integrated anvil and swivel base suit frequent repair tasks.
Trade-off: The published page does not provide a directly comparable clamping-force test.
Best suited to: general metal holding when mounted to a properly supported bench.
Manufacturer documentation for IRWIN 4935506 Mechanics. Check the exact model and current product sheet.
BESSEY BV-HD60 Heavy Duty
Fit: Flexible bench positions
Documented dimensions: 6 in jaw / 6 in opening; 2-3/8 in throat / 27 lb.
BESSEY documents six-inch jaws, six-inch opening, two-and-three-eighths-inch throat and approximately 27 pounds. The heavy-duty family uses ductile cast iron, three mounting holes, two base lockdowns and a built-in anvil. A full swivel can help position awkward stock, but keep the work within the jaw and bench limits.
Why consider it: Manufacturer catalog specifies a 360-degree swivel and ductile-iron body.
Trade-off: Shallower throat than the Wilton or IRWIN options; still requires secure bolting.
Best suited to: flexible bench positions when mounted to a properly supported bench.
Manufacturer documentation for BESSEY BV-HD60 Heavy Duty. Check the exact model and current product sheet.
BESSEY BV-MPV5 Multi-Purpose
Fit: Pipe plus flat stock
Documented dimensions: 5 in jaw / 5 in opening; 2-3/4 in throat / 29 lb.
The BESSEY multi-purpose model combines five-inch flat jaws, five-inch opening, two-and-three-quarter-inch throat and two-inch published pipe capacity. Its rotating jaw assembly and 360-degree swivel offer versatility for mixed shapes. Use a proper pipe fixture and avoid assuming the stated capacity applies to every pipe material or wall thickness.
Why consider it: Rotating pipe-jaw assembly grips round stock without relying only on flat serrated jaws.
Trade-off: Five-inch jaws are narrower than the six-inch general-purpose alternatives.
Best suited to: pipe plus flat stock when mounted to a properly supported bench.
Manufacturer documentation for BESSEY BV-MPV5 Multi-Purpose. Check the exact model and current product sheet.
Six checks before buying a bench vise
Compare the thickest workpiece to maximum jaw separation, not just jaw width.
Deeper throats allow the vise to grip farther from an edge; a wide jaw can still have a shallow throat.
Bolt through a reinforced benchtop using manufacturer-approved hardware and clearance.
Serrated steel jaws grip metal but can scar wood, aluminum or finished parts.
A swivel base helps orient work but needs room around the bench edge and secure locks.
Dedicated pipe jaws improve holding on round stock; check stated pipe capacity.
How to choose a bench vise for your shop
Jaw width versus opening
A six-inch jaw may open only five inches. Check both values and the throat depth.
Metalwork versus woodworking
Steel serrations suit many repair tasks; add protective pads or a dedicated woodworking vise for finished stock.
Mounting and bench stability
A 39-pound vise plus clamping and striking loads needs a sturdy bench with properly spaced bolts.
Why published capacities can mislead
For example, a six-inch jaw width does not guarantee a six-inch opening. The Wilton 11106 currently lists a five-inch maximum opening; always check width, opening and throat depth separately.
Compare current bench vise options
Check jaw dimensions, base clearance and actual model documentation before buying; use manufacturer instructions for safe installation.
Compare Current OptionsReview the Vise ComparisonHow we evaluated bench vises
This comparison relies on published model specifications and disclosed trade-offs, not measured clamping trials.
Manufacturer documents
We checked current Wilton and IRWIN model pages plus the BESSEY technical vise catalog.
Dimensions were compared by exact model rather than combining figures from different sizes.
Limits of the comparison
- Jaw width and maximum opening are separate dimensions.
- Throat depth determines how far a piece can reach into the vise.
- Swivel range and lockdowns affect access to awkward work.
- Bench reinforcement is essential for heavy models.
- Pipe jaws and soft jaw covers serve different stock shapes.
Three bench vise dimensions that matter
Published specifications show why equal jaw widths do not mean identical workholding.
Published specifications are model-dependent and may be revised. Do not treat manufacturer clamping-force claims as cross-brand laboratory results.
Which bench vise fits your workshop?
Start with the stock you hold most often and the bench that must support the vise.
Six-inch jaws and a substantial body suit regular metalworking with a reinforced bench.
Review WiltonA swivel base and anvil are practical for frequent repairs and fabrication.
Review IRWINThe published full swivel range helps when stock needs several working angles.
Review BV-HD60Dedicated pipe jaws are more appropriate for cylindrical pieces than flat jaws alone.
Review BV-MPV5Five bench vise mistakes to avoid
A six-inch jaw is not a promise of six inches between the jaws. Read the opening specification.
Large vises transfer torque and impact to the mounting surface. Reinforce and fasten properly.
Serrated jaws can damage wood and soft metals; use appropriate protective jaw covers.
Tighten both base locks before applying force, especially with long stock.
Round-stock holding depends on the actual jaw design and published capacity.
Bench vise FAQs
What jaw width is practical for a home workshop?
Four- to six-inch vises handle many repair jobs. Choose based on actual opening, throat depth and workpiece size rather than jaw width alone.
Is a six-inch vise opening always six inches?
No. The current Wilton 11106 specification lists six-inch jaw width but five-inch maximum opening. Check the exact model.
Do I need a swivel-base bench vise?
A swivel base is helpful when repositioning awkward stock, but a fixed base may be sufficient for repetitive work. Secure the locks before loading.
Can I clamp finished wood in serrated vise jaws?
Yes with appropriate soft jaw covers, but a dedicated woodworking vise often distributes pressure more gently over broad stock.
How should a heavy bench vise be mounted?
Follow manufacturer bolt pattern and hardware instructions. Reinforce the bench and allow clearance for the handle and swiveling body.
What is vise throat depth?
It is the distance from the jaw top region to the screw or body obstruction, indicating how deeply a workpiece can sit between the jaws.
Are built-in pipe jaws necessary for round stock?
They are useful for regular pipe and tube work. Confirm the rated pipe diameter and protect soft or thin-wall material from distortion.
Related workshop guides
Research notes & specification sources
Research method: Manufacturer specifications were checked for jaw width, opening, throat, base and material. This article is not a hands-on endurance test.
Specification caveat: Some reseller listings disagree with current manufacturer figures for the Wilton 11106 opening. We use the current Wilton product page and recommend verifying the label.
- Wilton 11106 General Purpose official source
- IRWIN 4935506 Mechanics official source
- BESSEY BV-HD60 Heavy Duty official source
- BESSEY BV-MPV5 Multi-Purpose official source
Affiliate links lead to product search results; manufacturer links are informational.



