Best Workbench Power Strips for Garage and Workshop Benches
Compare six mountable workbench power strips by outlet count, housing length, cord reach, electrical rating and protection features.
Compare Power StripsCompare Six OptionsAffiliate disclosure: As an Amazon Associate, WorkshopGearGuide may earn from qualifying purchases made through qualifying links, at no additional cost to you. Retailer specification links below are provided for verification and are not represented as Amazon offers.
Quick answer
For most workbenches, the Eaton Tripp Lite PS2408 offers eight outlets across a 24-inch mountable housing. Choose the PS120406 for compact benches, PS3612 for long workstations or PS4816 for a wide bank of low-draw devices. All outlets on a strip share its total electrical rating; do not use a power strip to increase available circuit capacity.
Compare six workbench power strips by outlets and electrical rating
Check total amperage, cord length, mounting hardware and whether surge protection is explicitly provided. A circuit breaker alone does not mean surge protection.
| Power strip / best use | Housing | Outlets | Mounting / cord | Shop Options |
|---|---|---|---|---|
| Eaton Tripp Lite PS120406 | Compact bench | 12 in housing | 4 outlets | 6 ft cord / mountable | Check Prices |
| Eaton Tripp Lite PS2408 | Everyday workshop | 24 in housing | 8 outlets | 15 ft cord / mountable | Check Prices |
| Eaton Tripp Lite PS3612 | Long bench | 36 in housing | 12 outlets | 15 ft cord / mountable | Check Prices |
| Eaton Tripp Lite PS3612RA | Tight plug clearance | 36 in housing | 12 outlets | 15 ft cord / right-angle | Check Prices |
| Eaton Tripp Lite PS4816 | Wide workstations | 48 in housing | 16 outlets | 15 ft cord / mountable | Check Prices |
| Legrand Wiremold UL2064BC | Surge-protected bench | Industrial strip | 12 outlets | 6 ft cord / surge protection | Check Prices |
Amazon links are product-category searches. Specific models sold by exclusive retailers may not be available on Amazon; verify model numbers before purchasing.
Six workbench power strips: strengths and limitations
These are published-specification comparisons, not hands-on electrical tests. Confirm the exact model, electrical listing and mounting instructions.
Eaton Tripp Lite PS120406
Model: PS120406
Published configuration: Four 5-15R outlets in a 12-inch metal housing with a six-foot cord, per the Eaton owner manual.
A short strip avoids excess length on a narrow workbench or cabinet side. Only four receptacles; multiple tools and chargers still share one 15A input circuit.
Why consider it: A short strip avoids excess length on a narrow workbench or cabinet side.
Trade-off: Only four receptacles; multiple tools and chargers still share one 15A input circuit.
Best suited to: Small benches with limited devices.
Manufacturer / product information: PS120406
Eaton Tripp Lite PS2408
Model: PS2408
Published configuration: Eight 5-15R receptacles in a 24-inch aluminum mountable body with a fifteen-foot power cord.
Good balance of accessible outlet spacing and bench-edge coverage. A long cord must be routed away from blades, moving parts and trip paths; no surge protection is claimed.
Why consider it: Good balance of accessible outlet spacing and bench-edge coverage.
Trade-off: A long cord must be routed away from blades, moving parts and trip paths; no surge protection is claimed.
Best suited to: Medium workbenches and charging stations.
Eaton Tripp Lite PS3612
Model: PS3612
Published configuration: A 36-inch metal bench-mount strip offering twelve outlets and a 15-foot cord.
Distributes sockets across a long bench so adapters do not cluster at one end. Twelve outlets do not increase the 15A total circuit limit; avoid simultaneous high-draw tool loads.
Why consider it: Distributes sockets across a long bench so adapters do not cluster at one end.
Trade-off: Twelve outlets do not increase the 15A total circuit limit; avoid simultaneous high-draw tool loads.
Best suited to: Long assembly and electronics benches.
Eaton Tripp Lite PS3612RA
Model: PS3612RA
Published configuration: A twelve-outlet 36-inch metal strip with right-angle receptacle and input-plug configuration.
Angled receptacles can improve access when transformer plugs crowd a backboard. Check the outlet orientation and clearance before drilling; right-angle geometry can conflict with large adapters.
Why consider it: Angled receptacles can improve access when transformer plugs crowd a backboard.
Trade-off: Check the outlet orientation and clearance before drilling; right-angle geometry can conflict with large adapters.
Best suited to: Workbench backsplashes and narrow mounting areas.
Eaton Tripp Lite PS4816
Model: PS4816
Published configuration: Sixteen 5-15R outlets across a 48-inch metal strip with a covered power switch and circuit breaker.
Useful across a wide bench with multiple low-draw accessories and battery chargers. The 15A input rating remains the total limit; more sockets are not extra available amperage.
Why consider it: Useful across a wide bench with multiple low-draw accessories and battery chargers.
Trade-off: The 15A input rating remains the total limit; more sockets are not extra available amperage.
Best suited to: Wide benches and multiple charging points.
Legrand Wiremold UL2064BC
Model: UL2064BC
Published configuration: A twelve-outlet industrial metal power strip advertised with surge protection and a six-foot cord.
A useful alternative for sensitive benchtop electronics where documented surge protection matters. Check current UL listing, surge rating and exact model before purchase; a surge strip is not a substitute for correct circuit protection.
Why consider it: A useful alternative for sensitive benchtop electronics where documented surge protection matters.
Trade-off: Check current UL listing, surge rating and exact model before purchase; a surge strip is not a substitute for correct circuit protection.
Best suited to: Electronic instruments and low-draw accessories.
Six buying checks that matter more than marketing labels
Adding outlets does not add amperage. Confirm branch-circuit limits and each tool nameplate before use.
Keep strips away from wet work, coolant spray, dust accumulation and metal chips.
Avoid routing power cords near cutting tools, moving mechanisms, sharp edges or foot traffic.
An on/off switch and overload breaker are not evidence of transient surge suppression.
Wide transformers may block adjacent sockets; compare receptacle pitch and angle.
Follow the listed mounting instructions and applicable electrical code; do not daisy-chain power strips.
How to choose a workbench power strip
Electrical rating comes first
Read the strip input rating and each connected device nameplate. Multiple outlets do not make a 15A strip suitable for several simultaneous high-current tools.
Choose outlet spacing and reach
Measure the available bench rail and distance to the wall receptacle. Long housings spread chargers out but can crowd a narrow workstation.
Mount for safe access
Keep sockets away from liquids and heavy dust, avoid concealed damage and never mount where the switch or plug cannot be reached.
Why published capacities can mislead
For example, a 2,600-pound cabinet rating is not permission to put that weight in a single drawer. Drawer-slide limits apply to individual slide pairs, and floor, caster and distribution limits still matter. Follow the manufacturer loading and moving instructions.
Compare current workbench power strip options
Compare outlet spacing, cord reach, mounting accessories and electrical listing. Amazon search results may include different configurations.
Compare Power StripsCompare Mountable StripsHow we evaluated workbench power strips
We compared published outlet counts, electrical ratings, housing lengths, cord lengths, mounting arrangements and explicitly documented surge protection. We did not conduct electrical load or thermal testing.
What published specifications do not establish
A high outlet count does not increase branch-circuit capacity or make simultaneous use of multiple high-draw power tools safe.
We did not test breaker trip curves, enclosure durability, heat rise, grounding continuity or surge performance. Follow manufacturer instructions and local electrical requirements.
Evaluation priorities
- Total input amperage and plug type.
- Outlet count and spacing for chargers and adapters.
- Housing length relative to bench dimensions.
- Cord length, strain relief and mounting hardware.
- Explicit surge-protection claims versus basic overload breakers.
Three workbench power-strip numbers that matter
Electrical capacity is limited by the strip and branch circuit, not the number of receptacles. Verify total connected load and avoid using strips as permanent wiring.
Electrical capacity is limited by the strip and branch circuit, not the number of receptacles. Verify total connected load and avoid using strips as permanent wiring.
Which power strip fits your workbench?
Select the installation length first, then verify load and protection needs.
PS120406 is a compact 12-inch option.
Review this stripPS2408 spreads outlets across 24 inches.
Review this stripPS3612 covers a 36-inch mounting rail.
Review this stripPS4816 provides 48 inches of distribution without increasing total amperage.
Review this stripFive workbench power-strip mistakes to avoid
Sixteen outlets do not create sixteen independent circuits; add up actual connected loads.
A basic breaker protects against overload but does not automatically suppress voltage surges.
Do not plug one strip into another to reach distant tools or increase outlet count.
Keep receptacles away from conductive debris, liquid splash and damaged cords.
Verify input plug type, cord length, adapter clearance and supplied mounting hardware.
Workbench power strip questions answered
How many outlets should a workbench have?
Choose enough outlets for the devices you use, but calculate total current separately; extra sockets do not increase circuit capacity.
Can I run a table saw from a power strip?
Follow the saw manufacturer instructions and circuit requirements. Many high-draw stationary tools should use a suitable dedicated wall receptacle rather than a convenience strip.
Is a 15A strip enough for multiple power tools?
Not necessarily. Check nameplate loads and do not operate high-draw tools together beyond the strip or circuit rating.
Does a circuit breaker mean surge protection?
No. Overload interruption and transient surge suppression are different functions.
Can a power strip be mounted under a workbench?
Only where the manufacturer permits mounting and the location keeps outlets accessible, dry and protected from damage.
Can I plug one power strip into another?
No. Avoid daisy-chaining strips or using them as a substitute for permanent receptacles.
What is the difference between 12 and 16 outlets?
Outlet count and housing length. For models with the same 15A input rating, both share the same total available amperage.
Related workshop guides
Research notes & specification sources
Research approach. This guide is an editorial comparison of publicly available specifications. It is not based on personal ownership, instrumented tests, or manufacturer sponsorship. Specifications can change; check the exact model number and current seller documentation before purchasing.
Representative primary sources used for the comparisons and calculations:
- Eaton Tripp Lite PS120406 manufacturer or product information
- Eaton Tripp Lite PS2408 manufacturer or product information
- Eaton Tripp Lite PS3612 manufacturer or product information
- Eaton Tripp Lite PS3612RA manufacturer or product information
- Eaton Tripp Lite PS4816 manufacturer or product information
- Legrand Wiremold UL2064BC manufacturer or product information
External source links are informational. Affiliate buttons on this page link to Amazon searches and may show alternative products rather than the exact retailer-exclusive model discussed.



